Metal Shingle Roof Cost (2026)
What steel, stone-coated, aluminum and copper shingles cost per square and per roof, and how they compare with standing seam.
Short answer: HomeGuide puts metal shingles at $6 to $14 per square foot installed, or $9,000 to $35,000 for a 1,500 to 2,500 sq ft roof, with a national average of $19,200. Labor is $3 to $8 per sq ft, about 50% to 60% of the job.
Metal shingle roof cost by roof size
| Roof area | Installed cost |
|---|---|
| 1,000 sq ft | $6,000–$14,000 |
| 1,500 sq ft | $9,000–$21,000 |
| 2,000 sq ft | $12,000–$28,000 |
| 2,500 sq ft | $15,000–$35,000 |
| 3,000 sq ft | $18,000–$42,000 |
| 3,500 sq ft | $21,000–$49,000 |
Cost per square by type
| Type | Material, per square (100 sq ft) | Installed, per square |
|---|---|---|
| Steel | $300–$500 | $600–$1,300 |
| Stone-coated steel | $370–$580 | $720–$1,280 |
| Aluminum | $325–$650 | $670–$1,600 |
| Tin-style | $300–$1,100 | $600–$1,800 |
| Zinc | $500–$1,000 | $1,000–$2,000 |
| Copper | $900–$2,000 | $1,300–$3,000 |
Stone-coated steel, the granule-finished look-alike of asphalt or shake, averages $12,200 to $25,900 installed (HomeGuide). Steep roofs over 6/12 cost more because of the extra safety setup.
Metal shingles vs standing seam vs asphalt
| Metal shingles | Standing seam | |
|---|---|---|
| Installed, per sq ft | $6–$14 | $9–$16 |
| Code minimum pitch | 3:12 (IRC R905.4.2) | 1/4:12 (IRC R905.10.2) |
| Lifespan | 40–70 years | 30–50+ years |
Compare with asphalt on the asphalt shingle roof cost page, or run every material on your own roof with the address estimate. Installing them yourself? See how to install metal roof shingles.
Sources
- HomeGuide, Metal Shingle Roof Cost (page titled 2026; byline Tara Farmer, Apr 5, 2023), accessed Oct 30, 2026.
- HomeGuide, Standing Seam Metal Roof Cost (page titled 2026; byline Tara Farmer, Apr 5, 2023), accessed Oct 30, 2026.
- International Code Council, International Residential Code (2021 and 2024), Section R905 minimum slopes, as summarized in IRC 2024 Chapter 9 (UpCodes) and the MyBuildingPermit residential re-roof checklist. Local amendments and manufacturer instructions can be stricter.
- OSHA, 29 CFR 1926.500(b): a low-slope roof is 4 in 12 or less; a steep roof is greater than 4 in 12. 1926.501(b)(13) requires fall protection for residential construction work 6 ft or more above a lower level.
Frequently asked questions
How much does a metal shingle roof cost?
$6 to $14 per square foot installed, or $9,000 to $35,000 for a 1,500 to 2,500 sq ft roof (HomeGuide).
Are metal shingles cheaper than standing seam?
Usually: $6 to $14 per sq ft installed vs $9 to $16 for standing seam (HomeGuide).
What is the minimum roof pitch for metal shingles?
3:12 under the International Residential Code (R905.4.2).
Last reviewed 2026-10-30. Results are estimates for planning; confirm quantities with your supplier and requirements with your local building code and the manufacturer's instructions.