Roofing price per square worksheet

Check Out Price Per Square Calculator

Roofing price per square guidelines. This guideline is a demonstration of the steps needed to produce a price per square. The Price Per Square module in RoofCalcWriter and RoofCalculator calculates your prices for you.

The prices listed below are for example only. This table is not a part of the Roof Calculator Program.

After you have updated the prices below just enter them into the Roof Calculator program to get a fast and accurate roof estimate

.

New work or Recover

Description	Standing Seam	35-Yr Comp	40-Yr Comp	40-Plus Comp	Heavy Shake
Main Materials per square
Loading
Felt
Fasteners
Total Material
Install Roofing Per sq
Clean-up
Other ?
Misc
Total Labor-Materials
W-Comp, PRTaxes 48%
Overhead
Profit
Bid Price Per Sq

ReRoof Remove 1 layer of roofing

Description	Standing Seam	35-Yr Comp	40-Yr Comp	40-Plus Comp	Heavy Shake
Materials (from above)
Install Roofing Per Sq
Clean-up
Other ?
Misc
Total Labor-Materials
W-Comp, PRTaxes 48%
Roof Removal sub contract
Overhead
Profit
Bid Price w roof removal

ReRoof remove 1 layer and OSB Sheathing

Description	Standing Seam	35-Yr Comp	40-Yr Comp	40-Plus Comp	Heavy Shake
Roof Materials (from above)
Plywood-OSB material
Total Materials
Install OSB Labor
Install Roofing Per Square
Clean-up
Total Labor per square
Total Labor-Materials
Roof Removal Sub Contract
W-Comp, PRTaxes 48%
Overhead
Misc
Other
Profit
Bid Price with roof removal-OSB

Recap

Description	Standing Seam	35-Yr Comp	40-Yr Comp	40-Plus Comp	Heavy Shake
Bid Price Per Square New work or recover
Bid price Remove 1 layer
Bid Price remove 1 layer & sheathing

Bid Price Per Sq New work or Recover

Description	Standing Seam	35-Yr Comp	40-Yr Comp	40-Plus Comp	Heavy Shake
4/12 thru 6/12
7/12 pitch
8/12 pitch
9/12 pitch
Over 9/12 pitch
To take this table further add for more than 1 layer of roof removal. Add for installing sheathing on different pitches. After you put in your own numbers in the tables above I would recommend using the numbers as the bare minimum for your price. For instance say the numbers used in the over 9/12 above might be sufficient for a particular roof, but for a cut-up roof 2 stories to the eave with bad access these numbers would be way too low. Select the appropriate price per square, then enter it into the Roof Calculator program for a fast and accurate estimate. Get a Blank Copy

RoofCalcWriter 10